Installing Perfect Solar Panels For Your Home Thanks To The Expert Guide To Solar Panels

Expert Guide to Solar Panels: Efficiency, Cost and Durability

If you need to make a large investment such as installing solar panels, you want to make an informed decision. However, this requires getting a bit more info on the topic of panels before you go shopping. So, we prepared an expert guide to solar panels: efficiency, cost and durability in order to assist you!

The different types of solar panels and their statistics

Shingled

Shingled solar panels are not strictly speaking a ‘type’ of solar panels, since they can be made using any of the three approaches we will cover next in our expert guide to solar panels. However, they need to be mentioned as a separate thing because their method of manufacture makes them stand out. Shingled solar panels are made with a different interconnectivity material. This separates each of the shingles, and makes it possible for them to activate one by one rather than just as a whole panel. This might not seem like much, but it means that even if only part of your panel is under conditions that lets it work, it will still produce some power. In turn, this makes them perfect for solar power backup systems. This also makes it easier for them to melt any snow that covers the panels, since singles activating speeds up melting.

Thin-film

Let’s just get this out of the way quickly: thin-film solar panels are not something you should use on your property. They are lightweight and easy to move and install, yes. But the fact that they are not made of silicon means they are the least efficient of all solar panel types. In turn, this means that you need a ton of them to produce any real amount of power. On top of that, they are relatively weak and can break down quickly. You will only find short term warranties for these on that market! This means you also need to look into hiring solar panel cleaning experts for your installation to maintain it properly if you want to avoid damaging anything by mistake in an attempt to clean. Where they do shine is installing them on busses, vans, trucks and other vehicles that have enough space for it.

Polycrystalline

Polycrystalline solar panels are made of pure silicon crystals which are melted together. However, this, ironically, makes them less efficient due to their manner of construction. What does improve over their efficiency is their power settings. You can find a good fit for your needs for sure, since they range from five to two hundred and fifty watts. This means that whether you want to set up a small or large installation of solar panels on your property, you can! They are also typically on the cheaper side, and they last for around twenty to twenty five years. This means you are not sacrificing longevity for the sake of a lower price. Unfortunately, their lower efficiency of around thirteen to seventeen percent means that you’ll need a lot of them to really start producing appreciable results. Or that you should use them as backup only.

Monocrystaline

The final type we need to cover in our expert guide to solar panels are monocrystalline panels. These panels are typically seen as the ‘most efficient’, and prioritized by major, reliable manufacturers. This is because they are made of high purity silicon, which considerably boosts their efficiency. It’s boosted to anywhere from fifteen to twenty two percent, in fact.  This also makes monocrystalline solar panels the most commonly used in energy systems used on commercial and residential properties. They’re also very durable, and can last up to twenty five years due to the material they’re made of. If you’re here looking to learn more about the topic of solar panels in order to find the most cost-effective solution, this is likely it. Their premium make does increase their price, making them somewhat expensive even if they’re worth it. And they don’t work the best if there’s lots of snowfall locally.

Top Three Manufacturers To Pick From

Next, our expert guide to solar panels has three manufacturers to recommend! They are all roughly comparable, and it really comes down to your preference to choose the ‘best’ one. As such, the order in which they’re presented does not indicate which is better. It should be noted that all the top manufacturers use monocrystalline panels, which makes them have near-identical durability and lifespan.

REC

REC is an excellent solar panel manufacturer that comes as a sort of middle ground between the other two. This is because the cost of REC solar panels are between $13,920 to $18,600, and their efficiency is 21.9%. This makes them a solid choice, and, as the experts from peakservices.com like to point out, they are also very easy to clean and maintain!

Panasonic

Panasonic is a well-established brand with amazing customer support. If you want solid panels which you can use no matter where you choose to raise a family, then they are a good pick. Their efficiency is, however, the ‘lowest’ out of our top three picks, at 21.7%. And the cost of their panels is between $14,640 and $18,600.

SunPower

The most efficient panel on our list with a whopping 22.8% percent is SunPower. However, this level of quality comes with a suitable price tag: you can expect to pay between $18,720 and $22,440. Still, SunPower panels are the best possible pick for anyone looking to squeeze as much power as possible out of their panels. They will ensure that your system runs smoothly and produces as much energy as possible. And with their weather resistance, they work amazingly well even in hostile conditions.

Choosing Your Solar Panels To Fit Your Home

At the end of the day, the only thing our expert guide to solar panels: efficiency, cost and durability can offer are the facts. It is up to you to choose the perfect solar panels for your home, depending on your location and local weather. As long as you don’t pick thin-film panels, you’ll be perfectly fine. And even they are amazing at allowing your vehicle to have an alternate source of power!